Hazardous Waste Treatment Incineration Technology
SafBon is committed to providing safe, reliable, efficient and environmentally hazardous waste treatment technology. For the hazardous waste treatment, SafBon adopts one of the most mature incineration technologies.

SafBon Hazardous Waste Treatment Technology

SafBon is committed to providing safe, reliable, efficient and environmental-friendly hazardous waste treatment technology, including a full range of solutions. The "combined with rotary kiln secondary combustion chamber" incineration technology is the mainstream of hazardous waste disposal technology that mainly used in industrial waste, hazardous waste, medical waste and other solid waste incineration.

Incineration Technical features

  • Wide applicability. The rotary kiln can deal with all kinds of industrial solid wastes with different properties and calorific value at the same time.

  • The burning process of the mature rotary kiln. The two combustion chambers can form a good "3T" (temperature, time, agitation) burning conditions and the waste is decomposed and burnt completely.

  • Two combustion chamber design temperature is between 1100°C and 1300°C, and the flue gas retention time is greater than 2 seconds which allows the dioxin to be completely broken down.

  • With the process of dry de-acid and wet scrubbing, the removal rate of HCl is 99.9%, and the removal rate of SOx is 99.3%. Dry de-acid can effectively prevent the corrosion of paste bag and metal structure.

  • Bag filter with three compartment design, online and offline cleaning can be achieved.

  • Lime and activated carbon supply is automatically.

  • The pre-cooling section design can not only guarantee the optimum temperature of the wet air, but also helps avoid the low temperature corrosion. 

  • The Thin Film Sludge Drying Technology
    The thin film sludge drying technology adopted by SafBon targets the circular economy and self-sustainable concept.

    The drying process is essential in all types of sludge disposal methods. The thin film sludge dryer can be applied for municipal sludge, industrial sludge and chemical sludge drying. It can be combined with incineration, landfill and other technologies to meet the waste reduction as well as other resource requirements surrounding waste management.

    Technology of Sludge Drying Combined with Power Generation

    In this particular application, the sludge from municipal sewage treatment plant is converted into biofuel by drying. The dry sludge is transported to a thermal power plant for power production. Meanwhile, the heat required for drying is the waste steam from the thermal power plant. The superiority of this application lies in the full use of social resources and social division of labor to solve sludge problem. It forms a complete market-oriented and sustainable development business application.

    The sludge drying combined with power generation technology includes one-stage and two sludge drying processes.

    One- stage Sludge Drying Process

    The process mainly includes several units:

  • The sludge receive, storage and transportation unit

  • The sludge drying unit

  • The tail gas treatment unit

  • The biological/chemical deodorant unit

  • The dry sludge storage and transportation unit

  • The steam unit

  • The electrical, instrument and control unit

  • In the one-stage sludge drying process, the sludge storage and drying is operated under closed negative pressure resulting in no odor. The drying process utilizes the advanced thin film sludge dryer, and recovers the heat of waste gas as well minimizes energy consumption and costs. In addition, the process is flexible, one-stage drying process can reduce moisture content to 30~45%.

    Process of One-Stage Sludge Drying Combined with Power Generation

    Two - stage Sludge Drying Process

    The process mainly includes several units:

  • The sludge receiving, storage and feeding unit;

  • The primary thin film drying unit

  • The waste gas and waste heat recovery unit

  • The secondary belt drying unit

  • The deodorant unit

  • The dry sludge storage and transportation unit

  • The steam unit

  • The two-stage sludge drying process completely uses the waste heat obtained from the primary drying system. With the integration of energy recovery, the operational costs can be reduced. In the process, the sludge in the plasticization stage is made into particles to avoid dust generation. With this two-stage drying process, the sludge can be completely dried. The operational temperature is below 110°C, which ensures the safety of the equipment and the operators.

    Process of Two-Stage Sludge Drying Combined with Power Generation

    Petrochemical Sludge Drying and Incineration Technology

    In this application, the petrochemical sludge drying and incineration technology uses the advanced thin film sludge dryer to realize the high efficiency heat drying of sludge and effectively improve the calorific value of sludge.

    Thin film sludge dryer has an inert system, special seal structure and multiple emergency safety assurance measures can provide the system with high safety and reliability.

    In view of the characteristics of oily sludge, the two section incineration system of "rotary kiln and two combustion chambers" is used for the full combustion of all the combustible materials in the sludge.

    The system completely recovers the energy generated in the sludge incineration process, and uses it in thin film sludge dryer. Such an act enables the system to satisfy the vast majority of dry energy consumption. Using "dry and wet" method to treat the tail gas, tail gas standardized emissions is achieved.